Author Topic: id request for possible wfrs. wave ribbed bowl  (Read 655 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul S.

  • Members
  • **
  • Posts: 5841
  • Gender: Male
id request for possible wfrs. wave ribbed bowl
« on: June 15, 2010, 06:15:40 PM »
The notched/toothed ring on the foot is similar to a definite Wfrs. bowl in recent months, so I'm hoping this is the same, and the 'wave pattern' is very much like the pieces shown in Leslie Jackson's book.    Diameter is 12.5/8 inches across the top, and it rings with that intense sharp metalic sound that goes on forever.   There is wear on the base, although perhaps not as much as I might have expected, and the pontil mark has been ground and polished well.    Would appreciate an experts opinion please, and thanks for looking.         


Offline vidrioguapo

  • Members
  • **
  • Posts: 1178
    • England
Re: id request for possible wfrs. wave ribbed bowl
« Reply #1 on: June 15, 2010, 08:20:50 PM »
I'd say this is spiral ribbed rather than wave ribbed.

Could it be this one?

http://www.whitefriars.com/catalogues/contents.php?pageNum_catalogue=8&totalRows_catalogue=246&id=1055

Doesn't look exactly the same as yours, but is certainly similar.  Perhaps John Hobbs has seen one and could comment.  I haven't seen one in the flesh so to speak, so not sure if the crimped foot rim finish was used on the Whitefriars bowl in the catalogue picture above.


Offline Paul S.

  • Members
  • **
  • Posts: 5841
  • Gender: Male
Re: id request for possible wfrs. wave ribbed bowl
« Reply #2 on: June 15, 2010, 09:17:48 PM »
thanks for looking, and on reflection think you are right re the 'spiral' description.   Certainly looking at a side profile of the bowl shape, it doesn't really look the same as pattern 7025 in the wfrs. link - less wildly flared perhaps.     


Offline chriscooper

  • Members
  • **
  • Posts: 1756
  • Gender: Male
    • Harrogate UK
Re: id request for possible wfrs. wave ribbed bowl
« Reply #3 on: June 15, 2010, 09:41:02 PM »
Looks right to me Paul, very much like a Sea Green one with a 'rigaree' foot I sold, will see if I can find a photo.
Chris

http://www.whitefriars.com/isit_contents.php?ID=3951

Anything like this? a few versions made with the pattern no. 8266
this one spiral ribbed with a rigaree foot

http://www.whitefriars.com/isit_contents.php?ID=6821

Also 2 coloured threaded version


Offline Leni

  • Members
  • **
  • Posts: 2277
Re: id request for possible wfrs. wave ribbed bowl
« Reply #4 on: June 15, 2010, 10:35:13 PM »
I think it's definitely the 8266.  I have one in Ruby with a similar 'rigaree' foot. 
Leni


Offline vidrioguapo

  • Members
  • **
  • Posts: 1178
    • England
Re: id request for possible wfrs. wave ribbed bowl
« Reply #5 on: June 16, 2010, 05:13:22 AM »
Mmmm? confused?  Doesn't the 8266 in the catalogue look like a threaded version of the same shaped bowl? Whereas the unthreaded version is a different catalogue number? (as per my post above)


Offline Paul S.

  • Members
  • **
  • Posts: 5841
  • Gender: Male
Re: id request for possible wfrs. wave ribbed bowl
« Reply #6 on: June 16, 2010, 09:40:02 AM »
sincere thanks to everyone  -  this evening I will in fact post a picture showing clearly the side profile, since the 'outline shape' seems quite important.   Paul S.


Offline Leni

  • Members
  • **
  • Posts: 2277
Re: id request for possible wfrs. wave ribbed bowl
« Reply #7 on: June 16, 2010, 10:08:25 AM »
As I understood it Emmi the 8266 shape was used for threaded, cloudy or plain.  Isn't the 7025 a shallower bowl?  As Paul says, a profile pic would help us sort out this question. The outline does seem to be the main difference. 
Leni


Offline Patrick

  • Members
  • **
  • Posts: 496
Re: id request for possible wfrs. wave ribbed bowl
« Reply #8 on: June 16, 2010, 06:20:28 PM »
   Diameter is 12.5/8 inches across the top,

Come on now Ladies......................   we are not paying attention here.
 The 8266 bowl came in 2 sizes, this is the small so the pattern number would be 8583.

However looking at Paul's image I think the shape is not this pattern but maybe I am wrong.

Regards, Patrick. :) :) :)


Offline chriscooper

  • Members
  • **
  • Posts: 1756
  • Gender: Male
    • Harrogate UK
Re: id request for possible wfrs. wave ribbed bowl
« Reply #9 on: June 16, 2010, 06:44:44 PM »
   Diameter is 12.5/8 inches across the top,

Come on now Ladies......................   we are not paying attention here.
 


Regards, Patrick. :) :) :)
LAYDEES indeed how very dare you

 

Search
eBay.com
eBay.co.uk

Link to Glass Encyclopedia
Link to Glass Museum
Enter
key words
to search
Amazon.com