Topic: Another nice bit but maker unknown

[ahremck]

I assume it is by a good maker.  Kralik?  My knowledge of this type of glass is miniscule.  Who might have made it?

Ross

[Margi]

Take a look at this link it may not be in there but may help http://sites.google.com/site/loetzandglass/kralik-1a--id-by-shape

[ahremck]

Thank you so much Margi.  Looks like lots of reading.

Ross

[keith]

Looks like Kralik,how's the rim finished?see if Craig pops in and see what he says,
                                                                      Keith.

[ahremck]

Thanks for the observation about the rim.  I will be careful to add a third photo of unmarked pieces showing the top in future.  I normally am attracted by signed pieces of Australian art glass or Scandinavian glass - so what I want is the base and the overall - the rim is irrelevant.

Ross

[ahremck]

The rim is ground flat and polished.  There is a tiny chip (which you can see) on the inside of the rim.

Ross

[ahremck]

Whoops forgot to add sizes.  150mm high, 70mm diameter opening, 63mm diameter base and c.110mm diameter at the widest point.

Ross

[keith]

With a flat cut top I'd say Kralik,had it been 'wavy' or fluted,twisted etc.. It may have been Pallme-Konig

[obscurities]

Hi there, Also Kralik....  I had not seen this one......  Can I use these pics also? 

Craig

[ahremck]

Be my guest again Craig.  Thanks for your attributions.  Ebay & Auctioneers are so hard to trust.  I used to say that auctioneeers had an M.C.D. =  "Masters in Creative Description".

Ross