Author Topic: Marks on base of paperweight (Read 1356 times)

Seapig · « **on:** January 12, 2013, 06:13:50 PM »

I have a glass paperweight with a small rectangular groove or niche on the base. I also have one with a tiny square groove. Can anyone tell me what this are? Many thanks!

mildawg · « **Reply #1 on:** January 12, 2013, 06:24:37 PM »

Need some pics, without them I think we can only tell you what you already know.

Seapig · « **Reply #2 on:** January 12, 2013, 06:31:50 PM »

OK thanks, I will try and do that tomorrow. I thought they might be caused by the manufacturing process although not sure how.

Seapig · « **Reply #3 on:** January 12, 2013, 07:30:36 PM »

This isn't my paperweight but it shows the type of mark I am referring to...

RAY · « **Reply #4 on:** January 13, 2013, 12:27:12 AM »

just looks like a pontil scar which was to deep to polish out

mildawg · « **Reply #5 on:** January 13, 2013, 01:59:58 AM »

I would have to agree with Ray

Seapig · « **Reply #6 on:** January 13, 2013, 08:54:32 AM »

That is what I suspected but good to have it confirmed. Many thanks!

Glass Message Board

Author Topic: Marks on base of paperweight (Read 1356 times)

Seapig

Marks on base of paperweight

mildawg

Re: Marks on base of paperweight

Seapig

Re: Marks on base of paperweight

Seapig

Re: Marks on base of paperweight

RAY

Re: Marks on base of paperweight

mildawg

Re: Marks on base of paperweight

Seapig

Re: Marks on base of paperweight