No-one likes general adverts, and ours hadn't been updated for ages, so we're having a clear-out and a change round to make the new ones useful to you. These new adverts bring in a small amount to help pay for the board and keep it free for you to use, so please do use them whenever you can, Let our links help you find great books on glass or a new piece for your collection. Thank you for supporting the Board.

Author Topic: Identification of a very large paperweight.  (Read 4883 times)

0 Members and 1 Guest are viewing this topic.

Offline Anna

  • Members
  • **
  • Posts: 2
Identification of a very large paperweight.
« on: June 18, 2006, 09:26:26 AM »
Hello,
I recently obtained an auction lot of paperweights and this is the only one I cannot identify. I was told it might be Caithness but I'm not too sure about this.
It is very large and came in its original deep square red box with white silk lining.
The base is ground with no makers mark at all.
Size: 4 inches (10 cms) high and 12 1/2 inches (32 cms) in circumference.
Weight: Nearly 3 lbs (1319 grams)
Colour and Decoration: It has large bubbles rising up from the bottom and in between these are spikes or explosions of what looks like suspended 'sea-foam' in red and blue.
On the base of the box is the following:
LP1122
Bar Code:5 010792 011226
"PARMIR"

See photographs below. I have taken them against a white and black background to try and show the weight to best effect.

http://www.geocities.com/mosty05/caithness_ball_box_b.jpg
http://www.geocities.com/mosty05/caithness_ball_box_w.jpg
http://www.geocities.com/mosty05/caithness_ball_front_b.jpg
http://www.geocities.com/mosty05/caithness_ball_front_w.jpg
http://www.geocities.com/mosty05/caithness_ball_top_b.jpg
http://www.geocities.com/mosty05/caithness_ball_top_w.jpg
http://www.geocities.com/mosty05/caithness_ball_label.jpg

Can anyone help?
Thank you
atherine

Support the Glass Message Board by finding a book via book-seek.com


Offline wrightoutlook

  • Members
  • **
  • Posts: 355
could be
« Reply #1 on: June 18, 2006, 03:11:33 PM »
It's possible that it's Caithness, although the hundreds of Caithness paperweights I've seen all have some sort of signature, or scratched numbers, or style desciption in boxy lettering on the bottom.
 
Those elongated, exaggerated bubbles are similar to Caithness Sea Dance Sable and some Moon Dance designs. And Caithness did make some magnums, which would explain the size and heft.

You might contact Caithness via its website.

Support the Glass Message Board by finding glass through glass-seek.com


Offline Anna

  • Members
  • **
  • Posts: 2
Re: Identification of Large Paperweight. Yes-Royal Crest
« Reply #2 on: June 19, 2006, 08:08:35 AM »
Since my posting I have attended an antiques fair and found a similar paperweight with an identical box and label.
I now know that my paperweight is made by Royal Crest and the 'Parmir' name on the label is the paperweight's name.
I hope this information may help others with identification.
Thank you to everyone at this sight for their help.
Katherine
atherine

Support the Glass Message Board by finding a book via book-seek.com


Offline josordoni

  • Members
  • **
  • Posts: 1693
  • Gender: Female
  • Location: Swinging London
    • United Kingdom
    • Josordoni Collectables
Identification of a very large paperweight.
« Reply #3 on: June 19, 2006, 10:16:23 AM »
Glad you identified your weight, but just to mention that Caithness Double Magnums were not always marked - I had one that I managed to identify from their collectors guides but they are not easy.  It helped it came with a load of other Caithness weights (no other makers) so I kind of started looking there.

Made good money on ebay too, around the £90 mark (this was last year), so worth keeping an eye out for.
Thank you very much!

Lynne
x
Josordoni Collectables - eBay Store

Support the Glass Message Board by finding glass through glass-seek.com


Offline wrightoutlook

  • Members
  • **
  • Posts: 355
is royal crest a British company
« Reply #4 on: June 19, 2006, 02:38:46 PM »
Is Royal Crest a British company? Is it a glass factory or glassmaking firm? Where is it located? I had always thought that Royal Crest was a name for a series of higher quality weights made in Taiwan and produced for export. And that Parmir was the name of the import or export company.

Support the Glass Message Board by finding a book via book-seek.com


Offline Leni

  • Members
  • **
  • Posts: 2273
Re: is royal crest a British company
« Reply #5 on: June 19, 2006, 03:34:00 PM »
Quote from: "wrightoutlook"
I had always thought that Royal Crest was a name for a series of higher quality weights made in Taiwan and produced for export. And that Parmir was the name of the import or export company.

Yep, I agree.  You're wright!   :lol:

Sorry, your right!   :wink:
Leni

Support the Glass Message Board by finding glass through glass-seek.com


Offline KevinH

  • Global Moderator
  • Members
  • *
  • Posts: 6545
    • England
Identification of a very large paperweight.
« Reply #6 on: June 19, 2006, 04:36:37 PM »
Nearly a year ago, in a message "Help with ID for 'flower and bubble' paperweight" ( http://www.glassmessages.com/index.php/topic,1506.0.html ) we came up with some info on Royal Crest.

Some of my comments in that message are repeated here (for "China" read "Taiwan" if that is where they are actually at):

Quote
I received an enquiry about Royal Crest weights through the PCC website and the enquirer has now come back with some information after I suggested they may be importers.

Yes - it seems that in the UK, the import company Lesser & Pavey, based in Dartford, Kent is supplying these from China.

At least, the importer has dealt with various Chinese products for many years, after it became cheaper than sourcing from Europe (info from a Google search showing a 2003 news report for "art" goods)

The weights are also apparently stocked in some UK department stores (I don't know which ones though) under a brand called "The Leonardo Collection" - which links in nicely with the importer's address details.

Perhaps the "Royal Crest" certificates that are included in the box (but which give no details of source) are also produced in China on request? Or I suppose they may be inserted later by the importer.

Next questions to ponder - Are "Royal Crest" weights specific to this importer or are they simply regular Chinese production but "branded"? Can the same weights be found in various gift outlets at even cheaper prices than paid on eBay?
KevinH

Support the Glass Message Board by finding a book via book-seek.com


 

SMF spam blocked by CleanTalk
Visit the Glass Encyclopedia
link to glass encyclopedia
Visit the Online Glass Museum
link to glass museum


This website is provided by Angela Bowey, PO Box 113, Paihia 0247, New Zealand