Looking for Glass on ebay? Angela's Designer Searches can help! Click here!

Author Topic: Help with identification please  (Read 835 times)

0 Members and 1 Guest are viewing this topic.

Offline tsl45

  • Members
  • **
  • Posts: 12
Help with identification please
« on: July 07, 2006, 02:10:11 PM »
Hello All

Has anyone any thoughts as to who may have made these two pieces.  Both pieces have unfortunately suffered some damage.  The bottle neck is broken and I am unsure as to how it would have ended, it measures 230mm in height and 100mm at its widest point.  The smaller vase is of a much heavier construction and measures 120mm in height and is again about 100mm at its widest point, the flanged lip is approximately 78mm in diameter, both pieces have concave bases and broken pontil marks.  Many thanks in advance for any ones help with this request regards Tim

Images (I HOPE) :lol:
Vase                    http://www.tinypic.com/1z6xd36.jpg
Vase base                   http://www.tinypic.com/1z6xfsp.jpg
Bottle                   http://www.tinypic.com/1z6xj7t.jpg
Bottle Base                http://www.tinypic.com/1z6xgyf.jp


Offline pamela

  • Members
  • **
  • Posts: 2365
  • Gender: Female
    • Pressed Glass 1840-1950
    • Hamburg, Germany
    • http://www.pressglas-pavillon.de
Help with identification please
« Reply #1 on: July 07, 2006, 06:44:15 PM »
Hi Tim, welcome to the Glass board!
I am not the right address, person for your quest but am sure someone will drop in and be of assistance  :)
Pamela
http://www.pressglas-pavillon.de
http://www.glas-musterbuch.de

Experience teaches that anyone who begins to collect in any field can feel a change in his soul. He becomes a joyful man filled with a deeper empathy, and a more open understanding of worldly things moves his soul.    (Alfred Lichtwark 1852 1914)


Offline Tigerchips

  • Members
  • **
  • Posts: 1618
  • Gender: Male
Re: Help with identification please
« Reply #2 on: June 29, 2007, 05:23:08 PM »
Bump


Offline aa

  • Glass Professional
  • Members
  • ***
  • Posts: 1784
    • http://www.adamaaronson.com
Re: Help with identification please
« Reply #3 on: June 29, 2007, 09:16:07 PM »
Anthony Stern
Hello & Welcome to the Board! Sometimes my replies are short & succinct, other times lengthy. Apologies in advance if they are not to your satisfaction; my main concern is to be accurate for posterity & to share my limited knowledge
For information on exhibitions & events and to see images of my new work join my Facebook group
https://www.facebook.com/adamaaronsonglass
Introduction to Glassblowing course:a great way to spend an afternoon http://www.zestgallery.com/glass.


Offline aa

  • Glass Professional
  • Members
  • ***
  • Posts: 1784
    • http://www.adamaaronson.com
Re: Help with identification please
« Reply #4 on: June 29, 2007, 09:18:44 PM »
Round vase base looks as if it has a crack running through it, I'm afraid. :(
Hello & Welcome to the Board! Sometimes my replies are short & succinct, other times lengthy. Apologies in advance if they are not to your satisfaction; my main concern is to be accurate for posterity & to share my limited knowledge
For information on exhibitions & events and to see images of my new work join my Facebook group
https://www.facebook.com/adamaaronsonglass
Introduction to Glassblowing course:a great way to spend an afternoon http://www.zestgallery.com/glass.


Offline Tigerchips

  • Members
  • **
  • Posts: 1618
  • Gender: Male
Re: Help with identification please
« Reply #5 on: June 30, 2007, 08:31:17 PM »
I thought I recoginised the first one from somewhere.  8)


 

Search
eBay.com
eBay.co.uk

Link to Glass Encyclopedia
Link to Glass Museum
Enter
key words
to search
Amazon.com