Glass Message Board

Glass Discussion & Research. NO IDENTIFICATION REQUESTS here please. => Bohemia, Czechoslovakia, Czech Republic, Austria => Topic started by: Greg. on July 02, 2011, 02:14:19 PM

Title: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Greg. on July 02, 2011, 02:14:19 PM
Hi All,

Hoping to try and find out a little more on this cut and faceted thick walled Czech vase. Marked with an acid etched mark to the bottom corner 'TCHECOSLOVAQUE' which i gather is a generic Czech export mark for the French market. Wondering if its possible to find anything else about this specific design. Seems very well made, would date from around the 60's I would guess....?

Measures 3 inches tall and 4.5 inches wide, very thick glass.

Any thoughts appreciated.

Greg
Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Frank on July 03, 2011, 09:57:28 PM
Try wading through the Glass Reviews here http://www.cs-sklo.cz/
Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Greg. on July 04, 2011, 09:50:28 AM
Thanks Frank,  I'll start wading.  :)
Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Jindra8526 on July 04, 2011, 04:02:06 PM
I am not sure you will get succes becouse CGR does not document the First Czechoslovak Republic glass widely (1st Czechoslovak republic was from 28.10.1918 to 30.9.1938).

I would expect that your glass is somewhere from Jablonec region Riedel, Hoffman, no firm idea but pre WWII period

Jindrich
www.cs-sklo.cz
Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Greg. on July 04, 2011, 06:53:46 PM
Thanks for the hint about CGR and your info Jindrich, all info greatly received.

Think that's as close as I'm going to get with this one. :)

Many thanks

Greg



Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Frank on July 06, 2011, 12:10:59 AM
Don't give up!

I am surprised that this design is 30s but had wondered because of the mark and when I replied I could not enlarge images (rural internet can suck  :cry:)

I have also noticed that most of the marked pieces I am seeing turn out to be pre WW2 designs,  even if they continued in production post-war with same moulds and marks included.

Is this generally true Jindrich?

One good example being this Citrus juicer (http://sklo-union-glass.com/components/com_virtuemart/shop_image/product/resized/AP_347_c_103x200.jpg) Rosice pattern 10 but bearing an Inwald mark in use from 1886-1920!
Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Greg. on July 06, 2011, 08:56:18 AM
Thanks for the encouragement Frank...I'll persevere and see If I can dig anything out.

Many thanks
Greg
 :)   
Title: Re: Czech Cut and and Faceted thick Rectangular Clear vase - Tchecoslovaquie
Post by: Jindra8526 on July 06, 2011, 05:44:19 PM
Absolutely true Frank, many pre-war designs and moulds had been used for many years utnil 60ties, 70ties.
Some moulds had to be re-made and a bit re-designed to fullfill new technology conditions but basic design - namely from Schrötter or Hanyka were adopted.

I know that Mr. Vizner had got task to renew and redesign the Schrötter's "Lord" set, Mr. Urban had to refresh others, I will check it with him what it was.

Jindrich
www.cs-sklo.cz