Glass Message Board
Glass Discussion & Research. NO IDENTIFICATION REQUESTS here please. => British & Irish Glass => Topic started by: meegs on June 08, 2010, 09:59:32 AM
-
After weeks of haranguing local lighting and hardware shops and trawling the net I have sourced and purchased a UV reactive black light bulb to fit my Bagley Uranium glass tulip lamp. I am delighted with the effect it's stunning - although now I can no longer read by its light.
..... so excited by the effect I needed to share!
Cheers
Meegs
-
Congratulations! Can you send us a link to a picture?
-
I find a low-energy bulb in mine gives a good rich colour and a useful light. Awaiting the arrival of a second one also for use as a light.
BTW to be pedantic it's the glass that's UV reactive; the bulb produces the UV light.
-
Here's a quick snap, taken in darkness ( 10:30 pm here ).
Yes, you're of course quite correct Lustrousstone the glass is reactive, but when looking for the bulb I was instructed to call the bulb "UV Reactive" as not all black lights are created equal :). This bulb is 15w.
I'm also guilty of having two of these lamps; and yes a 20w low-energy bulb gives out lovely light through the lamp.
http://i285.photobucket.com/albums/ll71/marmite_2008/100_9697.jpg
All the best
Meegs
-
:hiclp: :hiclp: On a plinth as well! Hmm, perhaps mine need plinths.
-
I've never seen this lamp on a plinth, nor have I seen it so in Bagley documentation. I can't see how it would work unless the plinth had been modified to provide an exit point for the flex. This is an inherently dangerous process as you have no idea of how well the plinth has been annealed, and so it is a modification that should only be attempted by professionals.
Bernard C. 8)
-
Depends on your cable; fine two-core like mine has would be OK as it would go over the step in the plinth. No extra holes necessary. (And yes it's properly wired.)
-
I can't wait to see glass under a UV light too -- I mean I have at shows, but when it is one of Your pieces -- it just makes it that much more *Special*
;)
-
My obsession includes purchasing any plinths I find at a reasonable cost. That particular one I think is a Davidson cloud glass as its colours appear to me to be briar and topaz. The lamp fits/stands/balances nicely on it. As the bulb is fluorescent and does not give off a lot of heat I was not overly worried; thank-you Bernard for your advise I will keep and eye on it. Yes the flex comes out the side of the lamp and over the rim of the stand. There is normally a lot of clutter of trinket pots and candlesticks surrounding the lamp so a little elevation was in order.
Antiquerose123, beware the addictive qualities of seeing your own glass under black light. I started with a small torch (I would carry in my bag when I went glass shopping) from here http://www.homeofpoi.com/ , then to this bulb and now I feel the need to black light a display cabinet!
Cheers
Meegs
-
Bet you can't beat my 6 ft UV tube. The OH picked it up and uses it to show off to visitors sometimes.
-
Looks like Leni's husband has been wearing her glass!! :24: :24:
-
Quoted by me previously:
I could not resist posting this pic here -- when I found it:
http://www.answercult.com/wp-content/uploads/Bowl%20Glass.jpg
Looks like Leni's husband has been wearing her glass!! :24: :24:
:24: :24: :24: :24:
I want to post this here.....It was found by our MOD Anne. I think it is a worthy item to also post over here. All about the uses (many) of UV Light:
http://www.gainsboroughproducts.com/uvl_inspection.html
:hiclp: :hiclp: :thup: :hiclp: :hiclp: