Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: David E on January 16, 2013, 09:40:05 PM

Title: ID help for large rectangular, mould-blown, textured and cased vase
Post by: David E on January 16, 2013, 09:40:05 PM
This is another chunky piece that's amber, cased in clear glass weighing in at over 1.5kg (3.3lbs) and measuring 12.5 x 9.5 x 15.3cm (5 x 3¾ x 6in), with abstract leaf designs moulded in the sides.

The base has a very slight, large circular indent, but is as moulded (i.e. unfinished)

Any ideas on a maker, please?
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: Greg. on January 17, 2013, 10:44:14 AM
Reminds me of these that I have seen around on a couple of occasions, the ones in the link are attributed to Riihimaki, which I think is an incorrect attribution, although Scandinavia may be a good starting point....I'm sure i've seen some others for sale online a year or so ago, although can't remember where at present.

http://www.trocadero.com/accents/items/619315/en1.html
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: Ivo on January 17, 2013, 11:05:01 AM
Faglaviks is a possibility.
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: David E on January 17, 2013, 11:43:35 AM
Thanks both!

Greg: that link is good. The only difference is that the texture does not go the full height as per these examples, and the amber colour of mine is not as bright, but otherwise the similarity is very close. Can't tell whether these are clear-cased, but the large one is definitely cased.

Ivo: As always, your comments are welcome! I've googled the name but not with much success. A further trawl on GMB and the name Fåglavik does figure with a few attributions to similar pieces. Additionally an earlier post by 'flying free' also shows this link (http://www.faglaviksglas.se/ovrigtglas.htm). The photo third down, third from the left shows some similarly-made vases.

I'll contact the site owner to see if they can offer more help.
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: David E on January 17, 2013, 12:26:48 PM
Quick reply from site owner:

Quote
Jag tror inte den vasen kommer från Fåglaviks glasbruk, men vi blåste sådana vaser som var ganska lik din vas,
vi hade lite annat mönster.

Google Translate gives the following, which appears to make sense:

Quote
I do not think the vase is from Fåglaviks glassworks, but we blew these vases that were quite similar to your vase,
we had a little different pattern.

So perhaps another Scandinavian company?
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: astrid on February 12, 2013, 12:13:18 PM
It reminds me a bit of Joseph Schott, though his patterns are usually more elaborate. Apart from Scandinavian, it could also be German, though I'm not sure this colour was much used in German glass.

Astrid
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: David E on February 14, 2013, 04:59:09 PM
Thanks for this Astrid - hope you are keeping well!

I did try and find more about Schott, but there was nothing conclusive on this particular type of glass. The vases shown on the Fåglavik site (http://www.faglaviksglas.se/ovrigtglas/20070130_17.JPG) do look very close though. Do you have any links that shows the glass of Schott that might come close to matching this one?
Title: Re: ID help for large rectangular, mould-blown, textured and cased vase
Post by: astrid on February 14, 2013, 05:33:42 PM
The reason I was reminded of Schott was that his vases are often square, and his designs usually keep the top bit clear of patterns, like yours. However, the ones I come across of him usually look a bit more elaborate, so I can't link to anything really similar. So yours might very well be another company letting itself be inspired by the general style of the Schott designs. Sorry I can't help more...

Astrid