Glass Message Board
Glass Identification - Post here for all ID requests => Glass => Topic started by: Leni on May 31, 2006, 11:01:15 AM
-
This bowl is very similar to others in my Victorian vaseline collection, but it is pressed glass, obviously copying the hand blown Victorian style. Anyone know when and where it might have been made?
http://glassgallery.yobunny.org.uk/displayimage.php?pos=-2141
http://glassgallery.yobunny.org.uk/displayimage.php?pos=-2140
http://glassgallery.yobunny.org.uk/displayimage.php?pos=-2139
I'd also be interested in anyone making 'frames', or whatever you call them, for this style of dish to sit in. It is always a surprise to me that so many of the dishes which were clearly made to sit in a 'frame' have survived, but have lost their holder! :shock: I would have expected it to be the other way around, and for there to be a glut of handles around, for which the bowls which would have sat in them have been broken! :?
-
It surprises me that you say it's pressed. Has it got seams? I would have expected it to be mould blown. Dave buys dishes he doesn't want to get stands :? for his bowls
-
Yes, you're right of course Christine! :oops: :roll: No seams! It probably is mould blown.
Dave buys dishes he doesn't want to get stands for his bowls
But does he ever see stands without bowls? :? Where do they all go? Thrown away? :shock:
-
Pickle castor frames show up regularly on a couple of my eBay searches, so I imagine sweetmeats, bonbons etc. would also.
Most of these frames were quadruple silver plated and would lose the plating after a few years years of polishing. Rather than putting a beautiful glass into a now blackened metal holder, I'd bet they kept the glass and tossed out the frames.
-
It surprises me that you say it's pressed. Has it got seams? I would have expected it to be mould blown
Have just had another look at this bowl, and - surprise! - it does in fact have seams! Three, very cleverly concealed :shock:
I was thinking about the way it would be made and realised that with the 'frill' round the middle, it couldn't be mould-blown unless the frill - or the top section - was added after! :roll: So I looked more closely and found the seams :D
So, let's try this again :wink: : Does anyone have any idea when and where it might have been made?
-
Could still be mould blown. Blowing moulds sometimes have seams - I have seamed hyacinth vases - so you can get the glass out. In either case, I think the frill was probably applied seperately, unless you can find a seam in it. We need a glass expert, I'm probably talking a load of *@^$! :oops:
-
I think the frill was probably applied seperately, unless you can find a seam in it.
Went back and searched again and yes, the frill has seams in it too! :D
We need a glass expert, I'm probably talking a load of *@^$! :oops:
No way! You're talking a lot of sense, and making me think and re-examine - and therefore learn! :shock: Thank you! :D
-
Could be American. Where's Dave when we need him? Will look in his book later.