Glass Identification - Post here for all ID requests > Glass

Lalique in need of repair

(1/4) > >>

Paul S.:
looking at pic. No. 1 you don't see the problem  -  but then, oh, what a shame :cry:  -  not that I cud have afforded it had the damage not been there.  The charity shop knew what they had, and I did pay a lot of money despite the damage  -  but just couldn't come home without it.   My wife is still not talking to me.
You can see the signature on the base rim  -  plus the No., and I've been told it dates to something like the mid 1920's,  -  although don't see a picture of it in my one and only book on Lalique  -  the pattern looks like thistles, I think  -  grateful if anyone is able to let me know the correct name.    I'm assuming it's opalescent, and believe it is a pressed piece, as you can see four mould marks on the neck.
Since I obviously need to dis-assemble the three pieces (and re-construct using modern clear glue) - what is the best way to go about dissolving the original glue which I am thinking is non water based.     Do I need a solvent of some description, and if so, which is best  -  or is there another way to go about the job.      Height is about 213mm.         Undamaged, this is a substantially valuable piece, so I need to take time and have patience with the repair, and look forward to any suggestions.   Thanks for looking. :)

keith:
Well spotted Paul,I'd have snapped it up also,can't find it in my book but it says that type of mark dates from 1914 onwards :mrgreen: :mrgreen: ;D,
once you've got the bad glue off there are good glass glues that are 'invisible' when dry,
                                                                                          Keith.

rosieposie:
What a lovely Lalique piece Paul, and well worth the trouble it will take to effect a good repair.  Please will you let us see it when it is fixed so we can admire your handywork please?
I think you are right about it being thistles.... or could be cardoons!!
Rosie.

Mosquito:
Great find, even with the damage. Pattern is 'Domremy', no. 979, designed c. 1926. To remove the old glue you might have to use acetone, though some glues will come off with meths. Unless you know what glue was originally used, it comes down to trial and error as to what's best to get rid of it. The worst case scenario is if it's been stuck with an epoxy resin as that can be a nightmare to get rid of...

rosieposie:
Just crossed with you Mosquito!!!

Thought you might like to look at the Millers Guide page Paul.
http://www.millersantiquesguide.com/items/127462/early-20th-century-domremy/

Navigation

[0] Message Index

[#] Next page