Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: Pat on July 06, 2008, 12:18:01 PM

Title: What would these Stuart dishes have been used for?
Post by: Pat on July 06, 2008, 12:18:01 PM

I have two of these small stuart bowls nicely but simply cut and very thin glass. They are both etched Stuart England on the bottoms. At 8cms diameter and 3cms tall they seem too large for salts and too small for finger bowls.

Title: Re: What would these Stuart dishes have been used for?
Post by: Frank on July 06, 2008, 12:26:03 PM

Pickles etc.

Title: Re: What would these Stuart dishes have been used for?
Post by: Pat on July 06, 2008, 12:51:47 PM

Would they have been part of a set?

Title: Re: What would these Stuart dishes have been used for?
Post by: Andy on July 06, 2008, 01:10:12 PM

Pat,
i would expect they are part of a set, if you have a while, check these patterns,
http://www.replacements.com/crystal/STU.htm

Good luck!
Andy

Title: Re: What would these Stuart dishes have been used for?
Post by: Dave the Glass on July 06, 2008, 02:51:04 PM

Pat
If you haven't found it yet a good one to look at is

http://www.discontinueddesigns.co.uk/product.aspx?productid=490

It gives you about 20 pics on a page so you might be lucky & get the pattern

Dave