Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: jomo99 on July 16, 2008, 12:52:12 PM

Title: Cloud Glass Bowl & Plinth
Post by: jomo99 on July 16, 2008, 12:52:12 PM

  Hi Playmates!

                    Been trying to ID this bowl & plinth,looked on all the sites to no avail!


        The bowl itself is 13" across and 4" high whilst the plinth is 8" across and 2.25" high
         I have inspected the underneath and sides of both and canfin traces of neither a makers mark or registration no.

                       TIA

                       John

Title: Re: Cloud Glass Bowl & Plinth
Post by: jomo99 on July 16, 2008, 01:03:11 PM

  Forgot to say it weighs 2.7 kilos in total!


         John

Title: Re: Cloud Glass Bowl & Plinth
Post by: Mosquito on July 16, 2008, 01:21:22 PM

Take a look at Chris & Val Stewart's site, cloudglass.com  I'm fairly sure this is a Davidson pattern, you should be able to find it there.

Title: Re: Cloud Glass Bowl & Plinth
Post by: jomo99 on July 16, 2008, 01:37:56 PM

  Thanks Steve, As I previously said i'd checked on all the available sites including the Davidson & Cloud Glass but couldn't see it there!!!

  John

Title: Re: Cloud Glass Bowl & Plinth
Post by: Lustrousstone on July 16, 2008, 02:11:29 PM

I think you'll find it's a 696D and should have a matching frog. See here http://www.cloudglass.com/flower3.htm (http://www.cloudglass.com/flower3.htm). Sizes are slightly variable

Title: Re: Cloud Glass Bowl & Plinth
Post by: jomo99 on July 16, 2008, 02:27:31 PM

Thanks Christine! ;D

                           My error was I was looking at the pictures and sizes and assumed that design had a black plinth! also my size is between the 12" and the 14.5"!!

            Thanks again.

             Warmest Wishes,

             John