Glass Message Board

Glass Discussion & Research. NO IDENTIFICATION REQUESTS here please. => Bohemia, Czechoslovakia, Czech Republic, Austria => Topic started by: jonchellycain on May 27, 2009, 03:29:07 PM

Title: tchecoslova??? any ideas on who and when??
Post by: jonchellycain on May 27, 2009, 03:29:07 PM

Hi there
i picked this piece up in a charity shop a couple of days back the base is etched Tchecoslova??? im presuming they are CIA
has anybody any ideas on which czech factory it may be designer or age??
many thanks
michelle

Title: Re: tchecoslova??? any ideas on who and when??
Post by: jonchellycain on May 27, 2009, 03:40:56 PM

sorry size is 9cms tall, almost 21cms in diameter, 8 sided

Title: Re: tchecoslova??? any ideas on who and when??
Post by: Jindra8526 on May 27, 2009, 04:59:00 PM

Hi Michelle,
it must be old pre-war Inwald mould, Marcus has it in database of Rosice - Moravské Kyjov cca 1957 - pattern no  1982.

The caption should be read "Tchécoslovaquie" - French name for Czechoslovakia.
Jindrich

Title: Re: tchecoslova??? any ideas on who and when??
Post by: Sklounion on May 27, 2009, 05:22:43 PM

Hi Chelly,
Not an Inwald mould, but Rosice, from the period after Mr Vrtal re-opened the factory, mid-thirties.
Regards,
M

Title: Re: tchecoslova??? any ideas on who and when??
Post by: Jindra8526 on May 28, 2009, 04:59:44 AM

Thanks Marcus,
Same moulded "Tchécoslovaquie" sign appears at other Inwald pieces - for example also at Libochovice jug 1449 or same pattern vase.
One should expect that moulds had been fabricated at same place.

Jindrich

Title: Re: tchecoslova??? any ideas on who and when??
Post by: jonchellycain on May 28, 2009, 06:53:13 AM

Many thanks you guys, at first glance it doesnt really look much, but when you hold it up and have a proper look its a really nice piece, lots of colour within the glass very pretty
many thanks again
michelle

Title: Re: tchecoslova??? any ideas on who and when??
Post by: Sklounion on May 28, 2009, 08:25:53 AM

With less than perfect knowledge, I would like to make the following observations:

Rudolfova Hut moulds were predominantly made 1905- 1950s, by Ulrich and Christl, Mstisov. Only when that company, by then nationalised, became part of Sklarny Inwald, did Rudolfova Hut acquire an "in-house" mould-making capability.

Rosice moulds were mostly made for the factory, prior to 1946, by the Brno based H.Kiko mould-making company, which following the Benes decrees, continued as supplier, becoming Brnoform in the post-communist era, and supplying Rosice when it was, for a limited period, a part of Crystalex.

Libochovice moulds were supplied by both Czechoslovakian companies, tho' three tableware patterns definitely used imported moulds from the USA.

I have no information regarding Hermanova Hut's suppliers.

Raised marks to Inwald items are the exception, not the rule.

Hermanova Hut, Libochovice and Rosice items also carry the mark, but again not on all items. Another pre-war Czechoslovak manufacturer to use the raised mark on pressed glass was S.Reich.

The mark appears not to have been used after WWII.

Regards,

M

Title: Re: tchecoslova??? any ideas on who and when??
Post by: Jindra8526 on May 28, 2009, 08:36:19 AM

Absolutely comprehensive information. Many thanks Marcus.
Jindrich