Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: ahremck on July 23, 2010, 12:11:58 PM

Title: Another nice bit but maker unknown
Post by: ahremck on July 23, 2010, 12:11:58 PM

I assume it is by a good maker.  Kralik?  My knowledge of this type of glass is miniscule.  Who might have made it?

Ross

Title: Re: Another nice bit but maker unknown
Post by: Margi on July 23, 2010, 02:13:32 PM

Take a look at this link it may not be in there but may help http://sites.google.com/site/loetzandglass/kralik-1a--id-by-shape

Title: Re: Another nice bit but maker unknown
Post by: ahremck on July 23, 2010, 02:26:11 PM

Thank you so much Margi.  Looks like lots of reading.

Ross

Title: Re: Another nice bit but maker unknown
Post by: keith on July 23, 2010, 07:11:38 PM

Looks like Kralik,how's the rim finished?see if Craig pops in and see what he says,
                                                                      Keith.

Title: Re: Another nice bit but maker unknown
Post by: ahremck on July 24, 2010, 12:33:17 AM

Thanks for the observation about the rim.  I will be careful to add a third photo of unmarked pieces showing the top in future.  I normally am attracted by signed pieces of Australian art glass or Scandinavian glass - so what I want is the base and the overall - the rim is irrelevant.

Ross

Title: Re: Another nice bit but maker unknown
Post by: ahremck on July 26, 2010, 10:26:51 AM

The rim is ground flat and polished.  There is a tiny chip (which you can see) on the inside of the rim.

Ross

Title: Re: Another nice bit but maker unknown
Post by: ahremck on July 26, 2010, 10:30:20 AM

Whoops forgot to add sizes.  150mm high, 70mm diameter opening, 63mm diameter base and c.110mm diameter at the widest point.

Ross

Title: Re: Another nice bit but maker unknown
Post by: keith on July 26, 2010, 07:01:18 PM

With a flat cut top I'd say Kralik,had it been 'wavy' or fluted,twisted etc.. It may have been Pallme-Konig

Title: Re: Another nice bit but maker unknown
Post by: obscurities on July 27, 2010, 12:47:55 PM

Hi there, Also Kralik....  I had not seen this one......  Can I use these pics also? 

Craig

Title: Re: Another nice bit but maker unknown
Post by: ahremck on July 27, 2010, 01:33:50 PM

Be my guest again Craig.  Thanks for your attributions.  Ebay & Auctioneers are so hard to trust.  I used to say that auctioneeers had an M.C.D. =  "Masters in Creative Description".

Ross