Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: allan_666 on September 22, 2010, 07:00:51 PM

Title: green and blue glass vases encased
Post by: allan_666 on September 22, 2010, 07:00:51 PM

two encased glass vases green and blue at the bottom
measuring 12 " and the other 9"
both have base wear
thank you Allan

Title: Re: green and blue glass vases encased
Post by: Put-Lug on June 11, 2011, 05:31:52 PM

I'd like to give this a polite    *Bump*  !

Because one exactly like this has just come in to my possession and I would like to know something about it.

Eg. Origin.. Age..etc.

Any thoughts anyone??

Title: Re: green and blue glass vases encased
Post by: glassobsessed on June 11, 2011, 06:19:33 PM

How is the base finished, how is the rim finished?

John

Title: Re: green and blue glass vases encased
Post by: Put-Lug on June 13, 2011, 06:20:02 PM

Hi...

Got around to taking some photo's of mine...

Particularly the base and rim.

Not really sure how to describe the base, and the rim looks as though it has been heated and polished.... (Not sure this is the right terms, please inform me so I can learn and know for next time!)

Thanks!

Title: Re: green and blue glass vases encased
Post by: Put-Lug on June 13, 2011, 06:21:05 PM

Plus ... a couple more...

Title: Re: green and blue glass vases encased
Post by: glassobsessed on June 13, 2011, 11:00:29 PM

If the rim has been heat finished it will be round in cross section, if it was ground and polished it would be flat (possibly with bevelled edges). Yours looks heat finished.

If the base has got a concave depression this is usually what we call a polished pontil mark. This is where it would have been attached to the glass workers metal rod (called a pontil rod/iron), removing the rod leaves a scar on the glass (pontil scar/mark), when this is ground and polished away it leaves a polished depression. Some bases are flat and shaped by a mould some are ground and polished to make them flat. I can't tell for sure how yours are finished from the photos.

A possibility for maker of your vases would be Aseda, they certainly made vases in blue and green, there are three examples here towards the bottom of the page:
http://www.20thcenturyglass.com/glass_encyclopedia/scandinavian_glass/aseda_glass/asedaglass_home.htm

John

Title: Re: green and blue glass vases encased
Post by: Put-Lug on June 15, 2011, 08:14:04 PM

Thanks for all the info John, and taking the time!   :thup:

Have looked around abit at 'Aseda' and can see the similarities but no definate matches yet!

'Heat Finished' is the term I could not think of... I knew what I meant, just didn't know what to call it!