Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: rosieposie on February 10, 2011, 04:31:21 PM

Title: Bullicante duck with aventurine inclusions......Maker help needed please.
Post by: rosieposie on February 10, 2011, 04:31:21 PM

This lovely duck is about 4" long and quite a 'stout' fellow. 

He has a polished pontil mark,  with some remnants of a hollow in the base.

I bought him ages ago,  and hoped he was a 'Barbini' duck,  but would really appreciate help, either with confirmation of this, or if not Barbini,  then the name of the maker.

I am of course, assuming he is Murano????? 

Title: Re: Bullicante duck with aventurine inclusions......Maker help needed please.
Post by: TxSilver on February 11, 2011, 01:14:53 AM

It looks like the work of Fratelli Toso, but not sure.

Title: Re: Bullicante duck with aventurine inclusions......Maker help needed please.
Post by: jonchellycain on February 11, 2011, 11:47:53 AM

Hi there
very similar to 2Fratelli Toso birds I had, so would agree with TxSilver
michelle 

Title: Re: Bullicante duck with aventurine inclusions......Maker help needed please.
Post by: rosieposie on February 11, 2011, 12:17:58 PM

Thank you both, Anita and Michelle,  he is chunkier than I would have expected a Fratelli Toso piece to be,  but I am comparing him with others I have.

I have just found this: http://www.carters.com.au/index.cfm/item/84241-murano-barbini-sommerso-duck-with-a-clear-glass-encasing-blue-wi/ ,  and wondered, firstly if it was the same maker, and secondly if the attribution was correct?

Maybe you could have a look and see what you think......it is blue, and mine is maroon, but the style looks very similar.

Title: Re: Bullicante duck with aventurine inclusions......Maker help needed please.
Post by: TxSilver on February 11, 2011, 02:27:22 PM

Rosie, I don't think the duck in the link is Barbini. It doesn't look like their work. It looks more like FT or AVeM -- someone along that line. The duck in the link is a totally different design than your bird. The bill, head, wings, and tail are different. I bet they were both designed and made by different hands.

Title: Re: Bullicante duck with aventurine inclusions......Maker help needed please.
Post by: rosieposie on February 11, 2011, 02:52:20 PM

Thank you,   :kissy: this is exactly why I always turn to the GMB for help.....it is so easy for an amateur to look at these two ducks and assume they are identical except for colour,  and of course Anita, as always, you are corect...there are a lot of differences I would never have spotted.

So do you think mine is FT then??  I will be very pleased if it is. :sun: