Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: butterflyspray on September 07, 2011, 04:10:04 PM

Title: Would love some help with ID for this creamer
Post by: butterflyspray on September 07, 2011, 04:10:04 PM
Have been trying to figure out any info on this piece for a couple years but have found nothing. In another section of this forum someone thought maybe it was English or European. Any help or ideas would be much appreciated.  : )

The creamer is 5 3/8" tall and 5" wide and also has a fern pattern on both sides. It fluoresces under a black light, has three seam lines and a few bubbles in the glass.

Thank you so much for any information!

Title: Re: Would love some help with ID for this creamer
Post by: Paul S. on September 07, 2011, 09:20:00 PM
can you provide a link to your previous posting of this please.    I'm no expert on creamers but with my limited experience, wheel engraving (which is what this appears to be) on a pressed creamer seems unusual.     I assume your fluorescence is green, and is almost certainly caused by the presence of manganese oxide, which was added to the glass batch (when producing clear glass) as a decolourizer to counteract unwanted brown or greenish discolouration caused by iron impurities in the silica).      Apparently, the manganese functions as a chromatic neutralizer.     Presumably this piece doesn't carry any marks or Nos., and unless someone recognizes this particular pattern, you will remain forever without an attribution.   These objects were made (in glass) excessively commonly every where from before the middle of the C19 until the middle of the C20, and although you don't mention wear, it might be a general rule of thumb that the greater the wear the greater the age  -  but that is only a very general guide.   It very much depends on whether the creamer has spent its life on a table cloth or some far rougher surface - used heavily - or spent its life in a cupboard. :)
Ref.     'An Illustrated Dictionary of Glass'  -  Harold Newman  -  Thames and Hudson  -  1977. 
Title: Re: Would love some help with ID for this creamer
Post by: butterflyspray on September 07, 2011, 10:43:36 PM
Thank you for all the information Paul.  : )

Here's the link to the previous post (though there isn't much info there): http://www.glassmessages.com/index.php?topic=42979.new;topicseen#new

====================
Mod: Edited to add: The only details in the other thread regarding the Creamer were by Sid, who said:
"I don't recognize the cream.  It looks English or European to me."
====================

Yes, it does fluoresce a yellowy-green color. Unfortunately I could not find any kind of maker's mark. As for wear on the creamer, there are slight scratches on the smooth areas. However,it is difficult to see how much wear there is to the bottom because the glass itself is almost like its textured, even more so on the foot. It is really an interesting creamer.