Glass Message Board
Glass Identification - Post here for all ID requests => Glass => Topic started by: I love all Glass on September 12, 2011, 08:36:47 PM
-
A very unusual glass pot, which is twisted arround and full of curves, standing on four feet which are ground flat and intersected by large polished pontil. The lower section has a raised rim, also smooth and round, and the top section is the reverse and sits on top, also the top is cut flat and well polished. Weight is about 0.9kg and 15cm tall by 7cm at widest. Am lost as to maker, any i.d, thanks in advance. Simon
-
Hi, unfortunately your pictures do not blow up sufficiently to be able to see the detail in the pot. Is it iridescent at all? are there trails of glass on it or knobbles of glass, or is it just a twisted version of a square pot if you see what I mean?
If you can enlarge at least the main one of the pictures that would help enormously. I make mine 800x 600 somethings and that seems to work.
m
-
Hello there, there is no iridescense, it is very knobly and tactile, I dont think it was ever uare, rounded all over and very clear, I have tried to upload 800x600 but wont let me, hope these work. many thanks Simon I have tried to add larger pictures, within picture size, system wont let me, but thanks for trying. Simon
-
It's not actually the width / height of the picture that is the problem. It's the Kb size, which has to be 125Kb max.
An image with little detail can be 800 x 600 pixels but less than 125Kb (of image data). But a same-size image with more detail will have a greater Kb size because of more data.
If you do not have an application that will optimise your pics to give a lower Kb size, can you at least reduce the width / height to produce a pic that is larger than your orignals but is 125Kb or less?