Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: vintage_utopia on September 11, 2013, 04:28:55 PM

Title: ID help needed, 50's/60's blue cut to clear bowl
Post by: vintage_utopia on September 11, 2013, 04:28:55 PM

Hi, I need some help in identifying this bowl, it's 174mm dia at the rim and 95mm tall, the oval cuts are clear and the oblong ones are etched, and the base is polished flat, any help is much appreciated, thanks Rich

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: vintage_utopia on September 18, 2013, 03:37:30 PM

Hi,
Anybody got an idea  :),
Thanks Rich

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: Anne on September 18, 2013, 04:44:30 PM

Hi Rich,  welcome to the board. The board's a bit quiet at the moment, so please just bear with us whilst folks get a chance to take a peek at your bowl. Not everyone visits every day, so it may take a while to identify for you.

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: antiquerose123 on September 18, 2013, 08:24:09 PM

Will look around to see what I can find.......................But so RETRO looking, Love it!!

 ;)  ................and Welcome from me too!!

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: vintage_utopia on October 25, 2013, 10:32:36 AM

Hi, any ideas anyone, thanks  :)

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: bardonhill on October 26, 2013, 03:52:09 PM

Hi Richard, Nice to see you here, will pop in next week to have a look.

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: vintage_utopia on April 22, 2014, 09:54:04 AM

Hi, any idea's anybody :). thanks

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: flying free on April 22, 2014, 10:35:44 AM

Sorry I can't help but is it heavy to hold? heavy for size?
m

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: jumper on April 22, 2014, 09:24:39 PM

I think it's from Germany, 60s, 70s, VEB Glaswerk Harz-Kristall Derenburg, GDR, but I can't find a similar pattern.

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: Ivo on April 23, 2014, 08:03:05 AM

That is brilliant, thank you much. I have a vase in approximately the same pattern which escaped iden tification for years - it now has a place!

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: jumper on April 24, 2014, 06:53:37 AM

I'll continue looking for a reference. I saw glass like this several times at ebay's, but ebay is a reference only on rare occasions. The label shows a witch on a broom, and the firm is spelled exactly "HARZKRISTALL".

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: vintage_utopia on April 24, 2014, 10:56:30 AM

Quote from: flying free on April 22, 2014, 10:35:44 AM

Sorry I can't help but is it heavy to hold? heavy for size?
m

Hi, no it's lightweight and delicate, Rich

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: vintage_utopia on April 27, 2014, 11:00:34 AM

Quote from: jumper on April 22, 2014, 09:24:39 PM

I think it's from Germany, 60s, 70s, VEB Glaswerk Harz-Kristall Derenburg, GDR, but I can't find a similar pattern.

Hi, thanks for that, I've looked them up and they do some lovely glass, thanks again Rich

Title: Re: ID help needed, 50's/60's blue cut to clear bowl
Post by: jumper on May 26, 2014, 09:05:09 AM

I think this vase

http://www.ebay.de/itm/Vase-Blumenvase-Glas-blau-geschliffen-/360942088052?pt=Glas_Kristall&hash=item5409d32f74

is also from HARZKRISTALL