Glass Message Board
Glass Discussion & Research. NO IDENTIFICATION REQUESTS here please. => British & Irish Glass => Topic started by: Paul S. on April 16, 2014, 05:06:55 PM
-
just for show really, but also happy if anyone wishes to use for their own private library.
Struck me as being a little less than ordinary with this incurved top rim, and the pattern did make me think of some of the ABP cut pieces.
Simon Cottle describes this design as 'Imitation Cut' - a description which it's possible he has taken from the factory records, but I don't know for certain - but it certainly does a very good job of looking the part.
The Rd. No. and the factory trade mark are inside at the base of the bowl, on opposing sides.
I would have included the original Board of Trade drawing from The National Archives, but seems I don't have this - but will rectify in the coming days. :)
-
Thank you for showing this, Paul.
Thompson gives the design description as ‘Elaborate imit. cut’.
This is the first time I have seen a piece with just this RD number. The only other piece I have a photo reference for with RD 99715 is an oval pressed glass dish, 8¾ x 6¼ inches, actually bearing TWO RD numbers - RD 99715, and RD 106938 (registered 31 August 1888, and also described by Thompson as ‘Elaborate imit. cut’) – plus the Sowerby peacock mark.
(Permission for the re-use of these images on the GMB granted by Rob Young).
Fred.
-
you had me worried for a moment - I've rechecked this bowl, and it definitely does show one No. only, plus the peacock's head.
Presumably the other No., on Rob's dish, covers the shape - so made me think a similar situation might have existed with this bowl, but obviously not.
Regret I don't know the factory pattern No. When I next go to Kew I'll have a look at both 99715 and 106938.