Glass Message Board
Glass Identification - Post here for all ID requests => Glass => Topic started by: agincourt17 on October 16, 2014, 08:01:12 PM
-
A clockwork desk or counter service bell in a substantial yellow-green uranium glass mount (very reactive to UV light). It stands approximately 10cm high with a 8½cm wide base and weighs 532 grams. I’m not sure whether the glass is free blown and cut or blow moulded or press moulded.
(Permission for the re-use of these images on the GMB granted by Kevin Collins).
The bell has a plated metal top (which presumably would be pressed to activate the clockwork ringing movement). The clockwork movement has no obvious identifying marks.
I imagine this dates from the somewhere between 1840 and 1880.
I have seen several 19th century inkwells or inkstands in this chunky yellow-green uranium glass, sometimes with metal inserts or lids, but the glass was almost always cut to shape rather than pressed or blow moulded.
Has anyone seen something similar in other colours or perhaps with a marked clockwork movement or metal bell top, please?
Any more information welcome.
Fred.
-
Fred, is there a bevelled edge around the bottom of the glass? It looks on the pic as thought there might be both on the inside and the outside edge.
In which case might it be blown and panel cut?
m
-
There is certainly a narrow bevel around the bottom edge, which makes me suspect that the glass has at least been polished externally, and cut panels would be in accord with inkstands of this type.
Fred.
-
so might it be Bohemian glass, and sent over to have the metal inserts put in?
Also could it date later than 19th? or is there a kind of 'cut-off' date for uranium glass? ( I know I should know this and there have been plenty of discussions on the board but I can't remember).
m