Glass Message Board
Glass Identification - Post here for all ID requests => Glass => Topic started by: Frank Sacramento on July 11, 2015, 10:20:29 PM
-
Tall on is 5" has a crack at base and stem. Second in about an inch shorter with a couple of flea bites at the rim. Both stem are clear glass encasing black. Maker, era? Thank Frank
PS. Unable to post resized pics only the one. Very fustrating
-
These are U.S. however I never get involved in stemware because there were hundereds in not thousands of patterns & etches made by close to 50 manufacturers for decades. I suggest you post these to our largest U.S. based board below. There are 2,725 members & someone can probably ID them within 12 hours. They can range from the 1920s to the 50s. Offhand they remind me of Morgantown but again I don't get involved with stems.
http://chataboutdg.com/forums/
-
Thank You
-
OP had stems Ided in approx 90 minutes.
Morgantown #7606-1/2 Athena Champagne, crystal bowl and foot with cased ebony filament. (taller one) If you can give me the height and diameter of each, I could be more sure what the smaller one is used for. Could be a sherbet. ca. 1931.
Morgantown #778 Carlton etch.
-
Thank you. I packed them away after taking pictures.