Glass Message Board

Glass Identification - Post here for all ID requests => Glass => Topic started by: Fink_Glass on July 18, 2019, 06:53:45 PM

Title: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: Fink_Glass on July 18, 2019, 06:53:45 PM

Hi Everyone,

This is my first post here. I was wondering if anyone recognized this small cake stand.

Company: Possibly Sherekat

Country: Possibly England

Color: Green Fade to Crystal with Crystal Foot.

Pattern:

Piece: Cake Stand

Effects: Applied Green Spiral or Swirl. Color Zoned Platter.

Fluorescence: The Green Fluoresces Yellowish Green in Shortwave. The Clear fluoresces White when the Light is Further Away; but, Yellow when the Light is Close.

Pontil: Maybe

Signed: No

Pieces: Cake Stand

~Height: 2 and 3/16 inches

~Platter Diameter: 7 inches

~Foot Diameter: 3 and 8/16 inches

I cannot get the attachments to work because the file size required is far too small (I have to turn image quality down to 30% to get it to be that size).

Title: Re: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: Anne on July 19, 2019, 12:47:45 AM

Hi and welcome to the board. Maybe this will help with the image resizing... https://www.glassmessages.com/index.php/topic,34093.0.html

Title: Re: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: KevinH on July 19, 2019, 12:50:11 AM

Hi Fink_Glass welcome to the Board.

Have you tried reducing the image size to about 700 pixels on the lomgest side and then tweaking the quality rating?

For some other ideas see our thread on: TECHIE TIPS: Resizing images to fit the board (https://www.glassmessages.com/index.php/topic,34093.0.html), within the Board Information, Help and Announcemnets forum.

If you are still stuck on what to do, just ask in a post to this thread. Or you could send your image to me at kevh.glass AT btinternet DOT com (change AT and DOT to be the usual characters and close up the spaces).

Title: Re: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: KevinH on July 19, 2019, 12:50:42 AM

Anne beat me to it.  ;D

Title: Re: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: Fink_Glass on July 19, 2019, 01:45:22 AM

I only tried messing with the quality (which I had to bring down to less than 30% to get it small enough). I will attempt to fiddle with the size.

Title: Re: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: Fink_Glass on July 19, 2019, 01:52:22 AM

I had to go all the way down to 5XXx5XX; but, was able to get it in the size requirements. Thank you for the help.

Title: Re: Unknown Glass Cake Stand (Possibly Sherekat)
Post by: Anne E.B. on July 19, 2019, 12:02:58 PM

Sherekat appear to be a China & Glassware Wholesaler, so it might be difficult knowing where your cake stand was actually made and by whom https://www.myindex.co.uk/sherekat.htm