No-one likes general adverts, and ours hadn't been updated for ages, so we're having a clear-out and a change round to make the new ones useful to you. These new adverts bring in a small amount to help pay for the board and keep it free for you to use, so please do use them whenever you can, Let our links help you find great books on glass or a new piece for your collection. Thank you for supporting the Board.

Author Topic: square to round mdina?  (Read 1529 times)

0 Members and 1 Guest are viewing this topic.

Offline essi

  • Members
  • **
  • Posts: 597
    • all eras of w/friars and scand
    • england
square to round mdina?
« on: September 03, 2016, 10:22:38 PM »
Bought this recently, thinking it might be mdina. Is it right and where does it fit in to the mdina timeline.
Any help appreciated.
Tim

Support the Glass Message Board by finding a book via book-seek.com


Offline glassobsessed

  • Members
  • **
  • Posts: 6808
  • Gender: Male
    • Mdina
    • South Wales
Re: square to round mdina?
« Reply #1 on: September 04, 2016, 09:36:01 AM »
Yes Mdina, a small textured vase, in terms of date around 1971 give or take a couple of years.

Is there a polished pontil mark on the base?

John

Support the Glass Message Board by finding glass through glass-seek.com


Offline Nemmie

  • Members
  • **
  • Posts: 473
  • Gender: Male
    • South East England
Re: square to round mdina?
« Reply #2 on: September 04, 2016, 10:33:11 AM »
Yes there is, I can see it on photo 3 :)
“Anyone who stops learning is old, whether at twenty or eighty. Anyone who keeps learning stays young.”
― Henry Ford

Support the Glass Message Board by finding a book via book-seek.com


Offline essi

  • Members
  • **
  • Posts: 597
    • all eras of w/friars and scand
    • england
Re: square to round mdina?
« Reply #3 on: September 04, 2016, 02:33:49 PM »
Thanks for the feedback, I'm afraid its my poor camera skills john. It is a polished pontil about 40mm dia.
Don't see so many of these on google images, were they a short production run? .
Looks like a nice hand crafted item of glass.
Tim

Support the Glass Message Board by finding glass through glass-seek.com


Offline Lustrousstone

  • Members
  • **
  • Posts: 13714
  • Gender: Female
    • Warrington, UK
    • My Gallery
Re: square to round mdina?
« Reply #4 on: September 04, 2016, 02:40:46 PM »
I have one marked by Michael Harris, though mine is smoother at the top than yours http://lustrousstone.co.uk/cpg/displayimage.php?pid=1357

Support the Glass Message Board by finding a book via book-seek.com


Offline chopin-liszt

  • Members
  • **
  • Posts: 14624
    • Scotland, Europe.
Re: square to round mdina?
« Reply #5 on: September 04, 2016, 05:49:42 PM »
I wouldn't consider these to be any part of any "production run". They're early, from the period while Harris  and Vicente Boffo were still there, (polished round pontil marks are only found during the period Boffo was there, and are still fairly scarce).
These were being made while everything was fairly experimental, before there were any sort of official "production runs".

While the base part is made in a mould, the top is always hand finished, so can be of a completely different shape to the rest of the body - each one is unique.
They were made after Harris left, but not for terribly long.
Cheers, Sue M. (she/her)

Earth without art is just eh.

Support the Glass Message Board by finding glass through glass-seek.com


Offline glassobsessed

  • Members
  • **
  • Posts: 6808
  • Gender: Male
    • Mdina
    • South Wales
Re: square to round mdina?
« Reply #6 on: September 04, 2016, 06:20:24 PM »
I would disagree with that, anything that is made for several years I would consider standard production (and nothing wrong with that) presumably they could be ordered by suppliers from a catalogue.

Support the Glass Message Board by finding a book via book-seek.com


Offline chopin-liszt

  • Members
  • **
  • Posts: 14624
    • Scotland, Europe.
Re: square to round mdina?
« Reply #7 on: September 04, 2016, 06:33:26 PM »
 :)
Standard production yes, but not really a sort of properly organised "run". They were made, and then they weren't, probably because they took too much time and expertise to make.
Nothing there was really that organised, was what I was trying to get at.

As Tim said, "production run", I assumed he was assuming "a set of organised designs laid out and so many of each are to be made" sort of thing as it was in wfs or standard runs of things at Orrefors with numbering and so on.
Cheers, Sue M. (she/her)

Earth without art is just eh.

Support the Glass Message Board by finding glass through glass-seek.com


Offline glassobsessed

  • Members
  • **
  • Posts: 6808
  • Gender: Male
    • Mdina
    • South Wales
Re: square to round mdina?
« Reply #8 on: September 04, 2016, 06:40:10 PM »
We are splitting hairs.

It must have been well organised or the venture would have failed quickly, orders would not have been fulfilled, hot glass is potentially dangerous too...

Support the Glass Message Board by finding a book via book-seek.com


Offline chopin-liszt

  • Members
  • **
  • Posts: 14624
    • Scotland, Europe.
Re: square to round mdina?
« Reply #9 on: September 04, 2016, 06:53:45 PM »
I suppose I am. :)
But "production run" is not an expression I'd ever use in association with Mdina, while I would with many other factories.
Cheers, Sue M. (she/her)

Earth without art is just eh.

Support the Glass Message Board by finding glass through glass-seek.com


 

SMF spam blocked by CleanTalk
Visit the Glass Encyclopedia
link to glass encyclopedia
Visit the Online Glass Museum
link to glass museum


This website is provided by Angela Bowey, PO Box 113, Paihia 0247, New Zealand